Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : Replacing the diesel filter on 156 JTDm

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Diesel filter
Operation: Replacing the diesel filter on 156 JTDm

What to do to replace the diesel filter? Let's see how to proceed on a 156 JTDm. We lift the front hood of the car, we identify the diesel filter as in the video. We disconnect all the circulation pipes and the electrical terminals, then unscrew the tightening screws on the sides of the container with a socket wrench. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We close the front hood at the end of the replacement and start the car.


Posted on 22 December 2023 by ScegliAuto



How to replace the glow plugs on the Alfa Romeo 156 2.4 JTDM
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial we will see how to remove and replace the engine glow plugs on the Alfa Romeo 156 2.4 JTDM, but also on the 159 with 1.9 JTDM
How to replace the pollen filter on Alfa Romeo 156.
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial, we can see how it is possible to replace the pollen filter on an Alfa Romeo 156, following some simple steps: the first thing
How to replace the air filter on Alfa Romeo 156.
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial, we can see how it is possible to replace the air filter on an Alfa Romeo 156 by following a few simple steps: the first thing

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos