Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

This video is currently unavailable

Before starting, open the bonnet of your Alfa Romeo Giulietta. Begin by removing the upper hose connected to the windscreen washer reservoir.

This will give you access to the cover of the dipped beam bulb. Proceed to unclip and remove this cover.

Once the cover is removed, you will access the blown bulb. At this point, disconnect the plug attached to it and the retaining clip, then remove the bulb itself, completing the disassembly.

To install the new bulb and close everything up, simply reverse these instructions, and the replacement will be complete.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Replacing the Right Dipped Beam Bulb in the Alfa Romeo Giulietta
Replacing the Right Dipped Beam Bulb in the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today, you will learn how to replace a bulb in an Alfa Romeo Giulietta, a task that requires time and patience. Start by opening the front bonnet and…
How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This excellent video is brief but very informative, explaining with figures all the steps to replace the number plate lights on the Alfa Romeo Giulie…
How to Replace the Dipped Beam Bulb of the Alfa Romeo Giulietta
How to Replace the Dipped Beam Bulb of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide shows how to replace the dipped beam bulbs of the Alfa Romeo Giulietta. The first step is to secure the vehicle and open the bonnet. It is…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos