Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Gt
    4. : How to remove the inside door handle on Alfa Romeo GT

Alfa Romeo Alfa Romeo Gt - Video tutorial

Model: Alfa Romeo Alfa Romeo Gt MK 1 - Years 2003-2010
Part: Handle
Operation: How to remove the inside door handle on Alfa Romeo GT

Today we will see how to remove the inside door handle on an Alfa Romeo GT, following the instructions below. First we open the front door and go to remove the door panel; to do this we remove the plastic cover of the handle and unscrew all the screws that we find below, as shown in the video. At this point we unscrew the additional fixing screws that we find on the sides of the panel and remove the window lifter push-button panel, disconnect the electrical connector underneath; we then proceed with the removal of the panel. We just have to unscrew the fixing screws of the handle and disconnect its cable to remove it!


Posted on 16 January 2024 by ScegliAuto



Replace the inside door handle of the Alfa Romeo GT - 147
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Let's see in this video how to remove and replace the internal door handle of the Alfa Romeo GT, but also of the 147. First we open the front door an
How to remove the front right door lock on an Alfa Romeo Gt
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Let's see how to remove the right front door lock on an Alfa Romeo Gt. We remove the door panel and detach the fastening clips of the same; remove th
How do you remove the Alfa Romeo GT door panel?
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) In order to remove the door panel from the Alfa Romeo GT, you need to loosen the screws that fix it to its housing: these screws are located in the s

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos