Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio Antenna of an Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Antenna

Video tutorial

Before you begin, sit in the back seat of your Alfa Romeo 147. Start by unclipping and removing the rear service light, then disconnect the associated electrical connector. Next, unclip the clips securing the service light housing to the roof, and remove the housing itself.

This will give you access to the nut securing the antenna to the roof, which you need to unscrew. At this point, unclip and remove the antenna, then disconnect the electrical connector, and you will have completed the removal.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Fit a Shark Fin Antenna on the Alfa Romeo 147
How to Fit a Shark Fin Antenna on the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) To fit the shark fin antenna on the roof of the Alfa Romeo 147, start by unscrewing the old antenna. Remove the new antenna from the packaging, stick…
Removing the Heating/Air Conditioning Controls from an Alfa Romeo 147
Removing the Heating/Air Conditioning Controls from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) In this video tutorial, you will see the main steps to remove the air conditioning and heating controls from an Alfa Romeo 147. First, get inside the…
How to Replace the Radio in an Alfa Romeo 147
How to Replace the Radio in an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Today we will look at the main steps for removing and replacing the standard radio with a new multimedia system in the Alfa Romeo 147. First, get ins…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos