Do it yourself
Frequently asked questions about cars and motorcycles

How to Fit a Shark Fin Antenna on the Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Antenna

To fit the shark fin antenna on the roof of the Alfa Romeo 147, start by unscrewing the old antenna. Remove the new antenna from the packaging, stick the white part of the adhesive to the base of the new antenna, clean the area where the new antenna will sit, screw in the provided screw along with the cable where the old antenna was attached, and stick the antenna to the car roof, using a ruler to ensure it is straight. Press down firmly to ensure it adheres well all around. Finally, go inside the car, turn on the radio, and check if the radio station frequencies are clear.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo 147 (2000-2010 / MK 1) Before you begin, sit in the back seat of your Alfa Romeo 147. Start by unclipping and removing the rear service light, then disconnect the associate…
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…
Alfa Romeo 147 (2000-2010 / MK 1) Before you begin, enter the cabin of your Alfa Romeo 147. The brake light fuse is located inside the fuse box, which is situated above the pedals in …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos