Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Driveshaft on the Alfa Romeo GTV

Model: Alfa Romeo Gtv MK 1 - Years 1995-2004
Part: Axle shaft

In this video, you will see the procedure needed to remove and replace the front driveshaft on the Alfa Romeo GTV, following the instructions below. First, disconnect and remove the pipes of the brake pad sensor and fluid; then remove the front wheel and dismantle the caliper and disc, subsequently removing the front hub. At this point, disconnect the arm from the braking system by unscrewing the central pin, and then unscrew the bolts found at the base of the driveshaft to remove and replace it!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper on an Alfa Romeo GTV Spider
How to remove the rear bumper on an Alfa Romeo GTV Spider
Alfa Romeo Gtv (1995-2004 / MK 1) In this video, we will see the main steps to remove the rear bumper on an Alfa Romeo GTV Spider, following the instructions below. First, remove the …
How to replace the front headlight bulbs in the Alfa Romeo GTV?
How to replace the front headlight bulbs in the Alfa Romeo GTV?
Alfa Romeo Gtv (1995-2004 / MK 1) As shown in this tutorial, replacing the front headlight bulbs in the Alfa Romeo GTV is a very simple and quick task. Before proceeding, ensure the k…
How to Remove the Front Seat of an Alfa Romeo Gtv
How to Remove the Front Seat of an Alfa Romeo Gtv
Alfa Romeo Gtv (1995-2004 / MK 1) Remove the front seat of an Alfa Romeo Gtv. First, move the seat back (using the electric buttons if available) and raise the seat base. Then, use a …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos