Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. Giulietta
  6. : How to replace the Alfa Romeo Giulietta battery?

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Battery
Operation: How to replace the Alfa Romeo Giulietta battery?

In order to replace the Alfa Romeo Giulietta battery, the hood must be opened to gain access to the engine compartment. The battery is located on the right side of the engine compartment, at the left headlight. Subsequently, it will be necessary to disconnect the positive and negative terminals, using keys where necessary. Once both terminals have been disconnected, you will need to loosen the bolts securing the battery support brackets. Once all the bolts have been removed, the battery can be removed from its housing and replaced. The new battery can then be attached and connected.


Posted on 2 March 2024 by ScegliAuto



Replacing the battery on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial we will see how to remove and replace the battery on the Alfa Romeo Giulietta, following these simple steps. First of all we o
How to replace the Alfa Romeo Giulietta air filter
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike what happens in many other car models, the Alfa Romeo Giulietta air filter is not located in the upper area of the engine compartment but in t
How to set the time of an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before we can start, we will have to go and sit in the driver's seat of our Alfa Romeo Giulietta. So let's start by activating the instrument panel,

Other guides that may interest you

    Frequently Asked Questions

    • Giulietta 2010-2020 - What goes wrong when the start & stop light not available on the Giulietta comes on? Read Answer
    • Giulietta 2010-2020 - What does the Alfa Romeo Giulietta battery light indicate? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos