Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Internal Door Handle of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Handle

The door opening mechanism of the Alfa Romeo Giulietta may break; to replace it yourself, proceed as follows: you can order the handle online via Amazon to save time and money, or you can contact a dealer as preferred. Once the part arrives at your home, you need to remove the door panel; unscrew the 4 screws found in the handle and properly connect the metal cable (like a bicycle brake). There are a total of eleven screws to remove from the panel, including screws and covers. Use a plastic tool to remove the cover of the mirror located above the door panel. Also, using the plastic tool, remove the edge of the handle, taking care not to damage it. Then remove the two screws from the handle. Next, remove the side screw and the one underneath the door; also take off the plastic cover of the handle, where you will find another screw underneath. Remove the plastic triangle, being careful not to break the clips; disconnect the electrical connectors. Pull off the panel by disengaging it and lifting it up. Once removed, disconnect the metal wire from the handle. Proceed to fit the new handle and reposition all the removed parts in reverse order.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) Today we will discover the instructions that will allow us to disassemble and replace the internal handle of the front door of the Alfa Romeo Giuliet…
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the internal handle on an Alfa Romeo Giulietta, remove the cap located in the handle's housing and loosen the bolt beneath the cap. Next, …
Alfa Romeo Giulietta (2010-2020 / MK 1) In today's video, we will see how to remove the door panel of the Alfa Romeo Giulietta. This operation may be useful if you need to replace the elect…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos