Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : How to replace the rear light bulb on the Alfa Romeo 159?

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Light bulb
Operation: How to replace the rear light bulb on the Alfa Romeo 159?

In order to replace the rear light bulb on the Alfa Romeo 159, you need to open the boot lid and remove the side cover of the boot. In this way it will be possible to disconnect the connector connected to the rear part of the headlight and remove the support on which the bulbs are located, by pressing on the two clips. This will allow you to replace the bulbs, after disconnecting the connector. The same operation must be carried out for the bulbs located on the inside of the tailgate of the luggage compartment. After the replacement, it will be possible to insert the relative covers previously removed.


Posted on 13 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 159 2005-2011 - What type of lamps does the Alfa Romeo 159 have? Read Answer
    • 159 2005-2011 - Which bulbs do I need for the position lights of my Alfa Rome 159? Read Answer
    • 159 2005-2011 - Where is the Alfa Romeo 159 sidelight bulb located? Read Answer
    • 159 2005-2011 - What are the front position light bulbs of the Alfa Romeo 159? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos