Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : How to replace the headlight bulb on the Alfa Romeo 159?

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Light bulb
Operation: How to replace the headlight bulb on the Alfa Romeo 159?

In order to replace the headlight bulb of the Alfa Romeo 159, the hood must be opened to access the engine compartment. Next, you will have to detach the protective cover located at the rear of the headlight, in order to be able to disconnect the connector attached to the bulb. The latter can then be extracted from its housing and replaced with another spare part. The new bulb will have to be connected to its connector and inserted inside the special housing. Finally, the rear part of the lighthouse can be closed with the special cover.


Posted on 29 May 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 159 2005-2011 - What type of lamps does the Alfa Romeo 159 have? Read Answer
    • 159 2005-2011 - Which bulbs do I need for the position lights of my Alfa Rome 159? Read Answer
    • 159 2005-2011 - Where is the Alfa Romeo 159 sidelight bulb located? Read Answer
    • 159 2005-2011 - What are the front position light bulbs of the Alfa Romeo 159? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos