Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Suspension Bushes on an Alfa Romeo MiTo

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Bushings

Video tutorial

In this detailed video, you can see how to remove and replace the rear suspension bushes on the Alfa Romeo MiTo, which is also applicable to the Fiat Punto and Grande Punto. As specified in the video, this procedure requires significant experience and appropriate tools to avoid damaging the car and, most importantly, yourself.

After removing the two wheels, you need to take off the brake discs, disconnect the brake line, which should be bled after the procedure, and disconnect the handbrake cable. Once this is done, loosen the bolts of the axle and unscrew the bolts of the shock absorbers.

Finally, with the axle removed, you can take out the bush from its seat using a puller.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Bushes on the Alfa Romeo Mito
How to Replace the Bushes on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In today's video, you will learn how to replace the bushes on the Alfa Romeo Mito. First, lift your vehicle on the ramp. Identify the area where you …
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How to Remove and Replace the Rear Light on an Alfa Romeo Mito
How to Remove and Replace the Rear Light on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) To remove and replace the rear light on an Alfa Romeo Mito, open the boot lid, remove the cover located at the side of the boot, and unscrew the rear…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos