Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : Remove and replace the rear light on Alfa romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Tail light
Operation: Remove and replace the rear light on Alfa romeo Mito

Should we remove and replace the rear light on Alfa romeo Mito? Let's see in this video how to continue: open the bonnet of the luggage compartment, remove the cloth placed on the side of the luggage compartment, remove the rear light, unscrewing the pins in the inspection compartment and under the light with a special socket wrench. As soon as the headlight is free from any constraint, we can detach it from the bodywork, replace the damaged bulbs with new ones (voltage and size equal to the original), inserting them in the lamp holder. Finally we go to reassemble the new headlight or the same one we removed.


Posted on 15 October 2023 by ScegliAuto



Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
How to replace the rear bulbs on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In today's video tutorial we will see the main instructions to disassemble and replace the rear light bulbs on the Alfa Romeo Mito, in simple steps.
How to remove the rear stop light of an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Before we can start, we will have to go to open the tailgate of the trunk of our Alfa Romeo Mito. So let's start by unscrewing and removing the screw

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos