Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reversing Light Bulb on an Alfa Romeo MiTo

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Light bulb

Video tutorial

To replace the reversing light bulb on an Alfa Romeo MiTo, access the inside of the rear bumper, where you will find the light unit containing the bulb to be replaced. To remove the light unit, simply disconnect its connector and loosen the corresponding screw.

Once the light unit is removed, unscrew the protective cap, on which the bulb is also positioned. This should then be replaced, and the new bulb along with the corresponding cap can be reinstalled.

After installation, remount the reversing light unit and reconnect it.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

How to Remove the Reversing Light on the Alfa Romeo MiTo?
How to Remove the Reversing Light on the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) On the Alfa Romeo MiTo, replacing the reversing light bulb is an easy task if you have good manual skills. As seen in the video, if this is your firs…
How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
How to Replace the Dipped Beam Bulb in the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide shows you clearly and in detail how to replace the dipped beam bulb in the Alfa Romeo Mito. With the instrument cluster off, open the bonn…
How to Replace the Front Headlight Bulb on an Alfa Romeo MiTo?
How to Replace the Front Headlight Bulb on an Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the front headlight bulb on an Alfa Romeo MiTo, you need to unscrew the bolts located inside the wheel arch corresponding to the bulb bein…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos