Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a 2008/2009 Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Service warning light

The video shows how to reset the service light on a 2008 and 2009 Alfa Romeo Mito. It is a very simple operation that requires only a little time and basic manual skills. First, turn the key to the first click, without starting the engine. Close all doors. Press the set button repeatedly until the word TRIP appears on the central display of the instrument cluster. Do the same until KM or TEM READING appears. Hold down the phone button and within a second press the OK button. Hold OK for 5 seconds. Then use the arrow to find ASSIST PLUS and then FULL SERVICE. Press OK. Exit the menu and verify the reset operations.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Replace the Timing Belt on an Alfa Romeo Mito
How and When to Replace the Timing Belt on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) This guide outlines the main steps and instructions for changing the timing belt on an Alfa Romeo Mito. The timing belt on petrol engines typically n…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
How and When to Replace the Timing Belt on the Alfa Romeo Mito 1.4
How and When to Replace the Timing Belt on the Alfa Romeo Mito 1.4
Alfa Romeo Mito (2008-2018 / MK 1) Today's guide shows how to remove and replace the timing belt on the Alfa Romeo Mito 1.4; the manufacturer states that the timing belt should be repl…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos