Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Passenger Airbag from the Alfa Romeo 156

Model: Alfa Romeo 156 MK 1 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Airbag

Video tutorial

In this video tutorial, you will learn how to install the passenger airbag in the Alfa Romeo 156, following the instructions below. First, get into the vehicle and start by removing the plastic cover of the airbag located on the dashboard; then you will find the airbag underneath, as shown in the video.

At this point, use a 10 mm socket spanner to undo the screws, disconnecting the electrical connector to remove it completely; if necessary, replace it with a new one and refit everything by applying the reverse procedure!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel on an Alfa Romeo 156
How to Remove the Steering Wheel on an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) To remove the steering wheel on an Alfa Romeo 156, first disconnect the battery terminals. Insert the removal keys into the slots at the back of the …
How to Replace the Key Battery in an Alfa Romeo 156
How to Replace the Key Battery in an Alfa Romeo 156
Alfa Romeo 156 (1997-2007 / MK 1) If you own an Alfa Romeo 156 and want to learn how to replace the button battery inside the key, simply read the following guide carefully. First, yo…
How to Remove the Front Seats in the Alfa Romeo 156?
How to Remove the Front Seats in the Alfa Romeo 156?
Alfa Romeo 156 (1997-2007 / MK 1) This tutorial shows how to remove the front seats in the Alfa Romeo 156, a very simple and quick operation. First, disconnect the negative terminal o…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos