Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to replace the front headlight bulb of the Alfa Romeo Giulietta?

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Headlight bulb
Operation: How to replace the front headlight bulb of the Alfa Romeo Giulietta?

In today's video tutorial, we will see how to disassemble and replace the headlight bulb of the Alfa Romeo Giulietta, following these simple and quick steps. First, we open the engine hood and begin by removing the plastic protective cap of the bulb, which can be found at the back of the headlight. Then, we disconnect the electrical connector of the bulb and release the metal clip to remove it and replace it with the new one, as shown in the video. At this point, we connect the new bulb and securely attach it inside the headlight assembly!


Posted on 8 November 2023 by ScegliAuto



Replacing the headlight bulb on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial we will see how to remove and replace the headlight bulb, as well as how to remove the headlight, on the Alfa Romeo Giulietta.
How do you replace the front headlight bulb of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) The replacement of the headlight bulb on the Alfa Romeo Giulietta is done by opening the hood, so that access can be gained to the components located
How to replace the headlight bulb on the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) In order to replace the headlight bulb of the Alfa Romeo Giulietta, you need to open the hood and access the rear part of the headlight, removing the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos