Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Bumper of the Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Front bumper

This guide outlines the main steps to remove and replace the front bumper of the Alfa Romeo 159. First, open the bonnet and start by unscrewing and removing the fastening screws located at the top of the bumper; then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video. At this point, unscrew the screws located under the bumper and begin to unclip it from the sides; finally, remove the front bumper completely, applying the reverse procedure for reassembly!

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front bumper grille of the Alfa Romeo 159
How to disassemble the front bumper grille of the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the front bumper grille of the Alfa Romeo 159. First of all, we open…
How to Remove the Front Bumper on the Alfa Romeo 159
How to Remove the Front Bumper on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video, you will learn how to remove the front bumper from the Alfa Romeo 159. This tutorial also applies to the other two contemporary mod…
How to Remove the Rear Bumper from the Alfa Romeo 159?
How to Remove the Rear Bumper from the Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) To remove the rear bumper from the Alfa Romeo 159, open the boot and remove the side covers located inside, near the rear lights. This will allow you…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos