Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from the Alfa Romeo 159?

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Rear bumper

To remove the rear bumper from the Alfa Romeo 159, open the boot and remove the side covers located inside, near the rear lights. This will allow you to loosen the screws underneath and slide the rear lights out of their housings. Inside these housings, there will be screws to loosen that will allow you to remove the rear bumper. Additional screws securing the bumper are located inside the wheel arches and at the bottom of the bumper: by removing them, you will be able to detach the rear bumper.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on the Alfa Romeo 159
How to Remove the Front Bumper on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video, you will learn how to remove the front bumper from the Alfa Romeo 159. This tutorial also applies to the other two contemporary mod…
Guide to Removing the Rear Bumper on an Alfa Romeo 159
Guide to Removing the Rear Bumper on an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video tutorial, you will learn how to remove and replace the rear bumper on an Alfa Romeo 159, following the instructions below. First, op…
How to Remove and Replace the Front Bumper of the Alfa Romeo 159
How to Remove and Replace the Front Bumper of the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) This guide outlines the main steps to remove and replace the front bumper of the Alfa Romeo 159. First, open the bonnet and start by unscrewing and r…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos