Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Rear Bumper on an Alfa Romeo 159

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Rear bumper

In today's video tutorial, you will learn how to remove and replace the rear bumper on an Alfa Romeo 159, following the instructions below. First, open the rear tailgate and start by unscrewing the fixing screws of the rear lights to remove them, disconnecting the electrical connectors of the bulbs; then unscrew the screws located above and below the bumper using a screwdriver or Torx key, as shown in the video. At this point, unscrew the screws located on both sides of the wheel arches, gently releasing the bumper from the sides until it is completely removed!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from the Alfa Romeo 159?
How to Remove the Rear Bumper from the Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) To remove the rear bumper from the Alfa Romeo 159, open the boot and remove the side covers located inside, near the rear lights. This will allow you…
How to Remove the Rear Light of an Alfa Romeo 159
How to Remove the Rear Light of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before you can start, open the tailgate of the boot on your Alfa Romeo 159. Begin by moving the carpet that covers the fixing nuts of the rear light.…
How to Remove and Replace the Front Bumper of the Alfa Romeo 159
How to Remove and Replace the Front Bumper of the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) This guide outlines the main steps to remove and replace the front bumper of the Alfa Romeo 159. First, open the bonnet and start by unscrewing and r…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos