Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Giulietta
    4. : How to replace the exterior mirror in the Alfa Romeo Giulietta?

Alfa Romeo Giulietta - Video tutorial

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Outside rearview mirror
Operation: How to replace the exterior mirror in the Alfa Romeo Giulietta?

In this tutorial we can see how to replace the exterior rearview mirror in the Alfa Romeo Giulietta. To do this, we will need an 8mm socket wrench, a plastic spatula and a Dremel. First of all, we remove both the internal mirror panel and the lower one used to protect the speaker. Next, we disconnect the regulator connector and gently enlarge the indicated holes, so that we can insert the key and unscrew the two bolts. Once this is done, we unscrew the last bolt and extract the mirror. We assemble the replacement following the reverse procedure.


Posted on 6 May 2024 by ScegliAuto



How to disassemble the wing mirror in Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) In this tutorial we can see how to disassemble the wing mirror in the Alfa Romeo Giulietta, an extremely simple and fast operation. First of all, rem
How to disassemble the external rear view mirror of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this guide we will see the steps that will allow us to disassemble and replace the wing mirror of the Alfa Romeo Giulietta. First of all, we open
Replace the rear view mirror cap on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video we see how to disassemble and replace the external rear view mirror cap of the Alfa Romeo Giulietta, but also of the Mito; we will also

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos