Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Handle on Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Handle

Video tutorial

Start by removing the upper triangle where the mirror is located. Use a plastic tool to avoid damaging the panel by scratching it. Now, still using the plastic tool, remove the upper edge of the handle.

Unscrew the deep screws inside. After this, there is a side screw to remove, then underneath where the light is, there is another screw to take out. Next, move to the handle where there is a plastic cover that needs to be removed, underneath which there will be screws to take out. Now carefully remove the triangle where the kit is located.

Disconnect the plugs connected to the bodywork. Now remove the panel and detach the handle cable.

Take out the handle and replace it with the new one, then reassemble all the parts removed earlier, working in reverse order.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Replacing the Outer Door Handle of the Front Door of the Alfa Romeo Giulietta
Replacing the Outer Door Handle of the Front Door of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today, we will discover the instructions needed to remove and replace the outer door handle of the front door of the Alfa Romeo Giulietta. First, ope…
How to Replace the Internal Handle of the Alfa Romeo Giulietta?
How to Replace the Internal Handle of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the internal handle of the Alfa Romeo Giulietta, remove the cap located in the handle's housing and loosen the bolt underneath the cap. Ne…
How to Replace the Gear Knob on an Alfa Romeo Giulietta?
How to Replace the Gear Knob on an Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the gear knob on an Alfa Romeo Giulietta, use a flathead screwdriver to lever and lift the old knob. Next, unscrew the bolt previously cov…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos