|
Do it yourself
| |||
| ||||
How to Replace the Right Rear Door Handle on an Alfa Romeo Giulietta
Model: Alfa Romeo Giulietta
MK 1
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Video tutorial
Replacing the rear door handle on the Giulietta is not straightforward. This is highlighted by our YouTuber in the first few minutes of the video. This is because the part we are changing is not bolted on, but rather die-cast, which requires a series of precautions that are not easy for those without specific equipment. First, remove the panel by unscrewing the three screws that hold it in place, then pull it off as it is held in by clips. Always use plastic tools. Disconnect the connectors, and now you can see that the handle attachments are die-cast. To free them, use a drill with a wood bit. You can find the part on eBay for about £30.00. However, it is not guaranteed that you will receive all the small pieces needed for proper reassembly. We will refit the pieces using some rather makeshift techniques, but it will be hidden once installed. Now, you can reattach the panel, screw in the screws, and you're done.
Updated on 10 June 2026 by ScegliAuto
Related tutorials
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
Today we will discover the instructions that will allow us to disassemble the rear door panel and the internal handle of the Alfa Romeo Giulietta. Fi…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
In this short and simple video, we will see the instructions necessary to remove and replace the external door handle on the front door of the Alfa R…
Alfa Romeo Giulietta
(2010-2020 /
MK 1)
Today we will discover the instructions that will allow us to disassemble and replace the internal handle of the front door of the Alfa Romeo Giuliet…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |