Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LPG Filter on an Alfa Romeo MiTo?

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

Video tutorial

To replace the LPG filter on an Alfa Romeo MiTo, open the bonnet, disconnect the battery and the LPG control unit. This will allow you to unscrew all the screws securing the LPG reducer, which can then be removed from its housing for easier access.

At this point, unscrew the solenoid and access the filter, which should be removed and replaced with a new spare part. After the replacement, you can reinstall all the components that were removed.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the LPG Filter on Alfa Romeo Mito 1.4
How to Replace the LPG Filter on Alfa Romeo Mito 1.4
Alfa Romeo Mito (2008-2018 / MK 1) In today's video, you will see how to remove and replace the LPG filter on an Alfa Romeo Mito 1.4, as well as on the Fiat Grande Punto and Lancia Yps…
How to Replace the LPG Filter on the Alfa Romeo MiTo?
How to Replace the LPG Filter on the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the LPG filter on the Alfa Romeo MiTo, open the bonnet to access the engine bay and disconnect the terminals connected to the battery. The…
How to Replace the Timing Belt on the Alfa Romeo Mito 1.4 Turbo
How to Replace the Timing Belt on the Alfa Romeo Mito 1.4 Turbo
Alfa Romeo Mito (2008-2018 / MK 1) Discover in this guide how to remove and replace the timing belt on the Alfa Romeo Mito 1.4 turbo petrol, following the instructions below. First, op…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

    Frequently Asked Questions

    • Mito 2008-2018 - What problem does the power steering have on Alfa Romeo Mito? Read answer
    • Mito 2008-2018 - What does the message "DST not available" mean in the Alfa Romeo MiTo? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos