Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting an Additional Chip Tuning Module

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Control unit

Video tutorial

Open the front bonnet and ensure it is securely supported. Unclip the connector attached to the rail (located on the side, near the oil level dipstick) by first removing the yellow safety clip.

At this point, create a bypass with the additional module: connect the original connector to the female end of the additional module wiring and the male end of the additional module wiring to the rail connector. Finally, position the cables and the module avoiding interference with moving parts or areas subject to overheating, securing them with cable ties.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulbs on an Alfa Romeo Mito
How to Replace the Number Plate Bulbs on an Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) How do you replace the number plate bulbs on an Alfa Romeo Mito? Follow these steps: open the boot lid and using a screwdriver or plastic lever, remo…
How to Replace the Multiair Module Filter on the Alfa Romeo MiTo
How to Replace the Multiair Module Filter on the Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) Multiair is the commercial name for the valve opening control system, which allows independent management of the timing and phasing of the valve open…
How to Replace the Key Shell on an Alfa Romeo MiTo?
How to Replace the Key Shell on an Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the key shell on an Alfa Romeo MiTo, use a screwdriver to pry off the silicone cover, giving access to the actual key. This can be disasse…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos