Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Multiair Module Filter on the Alfa Romeo MiTo

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

Video tutorial

Multiair is the commercial name for the valve opening control system, which allows independent management of the timing and phasing of the valve openings. Let's see how to replace it. Open the air duct to access the belt compartment, move the electrical cable, and locate the filter, placing absorbent paper underneath to soak up excess oil and prevent mess.

Replace the filter (it can be found for just under £40.00 on eBay). Now, close the module compartment, reposition the electrical cable, and replace the air duct. Job done.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Alfa Romeo Mito 1.4 Multiair Turbo
How to Replace the Timing Belt on the Alfa Romeo Mito 1.4 Multiair Turbo
Alfa Romeo Mito (2008-2018 / MK 1) In this video, you will learn how to replace the timing belt on the Alfa Romeo Mito 1.4 Multiair Turbo. Start by removing the cap and then the filter…
Replacing the Radiator on an Alfa Romeo Mito 1.4 MultiAir
Replacing the Radiator on an Alfa Romeo Mito 1.4 MultiAir
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, we will go through the instructions for removing and replacing the cooling radiator on an Alfa Romeo Mito 1.4 MultiAir. First…
How to Replace the LPG Filter on the Alfa Romeo MiTo?
How to Replace the LPG Filter on the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the LPG filter on the Alfa Romeo MiTo, open the bonnet to access the engine bay and disconnect the terminals connected to the battery. The…

    Frequently Asked Questions

    • Mito 2008-2018 - What problem does the power steering have on Alfa Romeo Mito? Read answer
    • Mito 2008-2018 - What does the message "DST not available" mean in the Alfa Romeo MiTo? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos