Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LPG Filter on Alfa Romeo Mito 1.4

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Video tutorial

In today's video, you will see how to remove and replace the LPG filter on an Alfa Romeo Mito 1.4, as well as on the Fiat Grande Punto and Lancia Ypsilon. First, open the bonnet of your car and locate the gas filter, which is near the air filter box; then remove the two gas inlet and outlet pipes by unscrewing the clamp screws.

At this point, use a 10 mm spanner to unscrew the nut of the filter's mounting bracket, allowing you to remove it and replace it with the new one; follow the video to the end for reassembly!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the LPG Filter on an Alfa Romeo MiTo?
How to Replace the LPG Filter on an Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the LPG filter on an Alfa Romeo MiTo, open the bonnet, disconnect the battery and the LPG control unit. This will allow you to unscrew all…
How to Replace the LPG Filter on the Alfa Romeo MiTo?
How to Replace the LPG Filter on the Alfa Romeo MiTo?
Alfa Romeo Mito (2008-2018 / MK 1) To replace the LPG filter on the Alfa Romeo MiTo, open the bonnet to access the engine bay and disconnect the terminals connected to the battery. The…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…

    Frequently Asked Questions

    • Mito 2008-2018 - Why doesn't Alfa Mito's DNA work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos