Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Giulia
    4. : How to replace the rear DAM of the Alfa Romeo Giulia?

Alfa Romeo Alfa Romeo Giulia - Video tutorial

Model: Alfa Romeo Alfa Romeo Giulia MK 1 - Years 2016-2024
Part: Rear bumper
Operation: How to replace the rear DAM of the Alfa Romeo Giulia?

In order to replace the rear DAM of the Alfa Romeo Giulia it is necessary to loosen the screws located in the lower part of the rear bumper, so that the DAM can be detached. To be able to remove it completely, the LEDs located in the upper part of the dam must also be removed by unscrewing the screws below. Once all the screws have been removed, it will be possible to go and completely remove the old DAM so that a new one can be inserted. When this has been positioned, it will be necessary to fix it with the appropriate screws in the lower and upper part.


Posted on 24 September 2022 by ScegliAuto



How do you replace the rear DAM of the Alfa Romeo Giulia?
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) The replacement of the rear DAM on the Alfa Romeo Giulia is carried out by loosening the screws located in the lower part of the rear bumper and in t
Disassembly of the Alfa Romeo Giulia key
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) In this video we see how the Alfa Romeo Giulia key is refitted. Let's start by reinserting the contact circuit into the plastic base, fitting it well
How to remove the rear lights in the Alfa Romeo Giulia?
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) In this tutorial, we can see how to disassemble the rear lights in the Alfa Romeo Giulia, a very simple and quick operation. First of all, make sure

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos