Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : How to disassemble the car radio on the Alfa 159

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Car stereo
Operation: How to disassemble the car radio on the Alfa 159

If we intend to replace the car radio on the car we can refer to this video and follow the following steps: First of all access the driver's seat by joining the specific keys for extracting the car radio which are the "U" shaped ones which they must be inserted into the pair of holes on the sides of the car radio, then exert pressure inwards and pull them towards you to extract it. With a pointed object, pry and lift the plastic trim that surrounds a real gearbox. Under this trim, there are screws that need to be removed and then pry again with a pointed object to remove the dashboard panel around the vents. 'air. At this point the bridge is free and it is possible to pull it towards you. Then take the new radio and position it carry out all the electrical wiring reconnect the antenna connector and reassemble everything backwards.


Posted on 4 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos