Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on Alfa Romeo Giulia

Model: Alfa Romeo Alfa Romeo Giulia MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the battery in an Alfa Romeo Giulia. The battery is located in the boot of the car, and to access it, you must first remove a small panel on the right side of the boot.

Now, remove the negative terminal cable (the black one) immediately; to remove the positive terminal, use a 10mm spanner. First, remove the cover using the two tabs and unscrew the two screws on the red safety strap.

Once done, you can unscrew the 10mm bolt that secures the battery located at the bottom right. Finally, remove the old battery and fit a new one by reversing the procedure.


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in an Alfa Romeo Giulia
How to Replace the Battery in an Alfa Romeo Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) The starter battery of the Alfa Romeo Giulia is located at the rear, in the boot, directly above the right rear wheel; if you need to replace it and …
How to Replace the Key Fob Battery on Alfa Romeo Giulia
How to Replace the Key Fob Battery on Alfa Romeo Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) Below, you will discover how to disassemble and replace the battery of the key fob for the Alfa Romeo Giulia. First, take your remote control and sta…
How to Replace the Key Battery of an Alfa Romeo Giulia
How to Replace the Key Battery of an Alfa Romeo Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) Start by prying off and removing the rear cover of the key fob for your Alfa Romeo Giulia. Next, extract the physical emergency key. Once done, unscr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos