Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : What is the fuse diagram of the Alfa Romeo 156?

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Fuse box
Operation: What is the fuse diagram of the Alfa Romeo 156?

In case one or more devices of the Alfa Romeo 156 suddenly stop working, the first thing we can do is check the status of their respective fuses, the diagrams of which are indicated in this video. As shown, we find the first box inside the passenger compartment, in the lower area of the dashboard on the driver's side. The second box is instead located inside the engine compartment, right near the battery. To replace a faulty fuse, it will be sufficient to grab it with the appropriate pliers, remove it, and insert the replacement, of course ensuring that the vehicle is turned off.


Posted on 3 August 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • 156 1997-2007 - Where is the Alfa Romeo 156 ABS relay located? Read Answer
    • 156 1997-2007 - Where do we find the ABS fuse in the Alfa Romeo 156? Read Answer
    • 156 1997-2007 - Where is the Alfa Romeo 156 airbag fuse located? Read Answer
    • 156 1997-2007 - Where is the Alfa Romeo 156 heater fan fuse located? Read Answer
    • 156 1997-2007 - Location of the Alfa Romeo 156 fuses? Read Answer
    • 156 1997-2007 - Where is the horn relay on an Alfa Romeo 156 located? Read Answer
    • 156 1997-2007 - Where is the Alfa Romeo 156 ABS fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos