Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Stelvio
    4. : How to change the battery of the remote control key for Alfa Romeo Stelvio - Giulia.

Alfa Romeo Alfa Romeo Stelvio - Video tutorial

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years 2016-2024
Part: Battery
Operation: How to change the battery of the remote control key for Alfa Romeo Stelvio - Giulia.

In this guide, we will discover the steps that will allow us to disassemble and replace the battery of the remote control key for the Alfa Romeo Stelvio, as well as the Giulietta. First, let's take our remote control and start removing the back cover of the remote control by levering on the sides; then, remove the battery that we find inside, as shown in the video. At this point, install the new battery of the correct type and in the correct direction (in this case, a CR 2032 3V battery); then, reassemble the remote control, following the video tutorial until the end!


Posted on 10 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Alfa Romeo Stelvio 2016-2024 - Where is the Alfa Romeo Stelvio battery located? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - Where is the Alfa Romeo Stelvio battery located? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - Where is the battery in my Alfa Romeo Stelvio? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - Where is the Alfa Romeo Stelvio battery located? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - Where is the Alfa Romeo Stelvio battery located? Read Answer
    • Alfa Romeo Stelvio 2016-2024 - Where is the Alfa Romeo Stelvio battery located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos