Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlights of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Headlight

Video tutorial

Today, this video tutorial will explain how to remove the front headlights of the Alfa Romeo Giulietta without removing the front bumper. To remove the headlights, you need to unscrew the upper brackets located on the bumper using a Torx screwdriver of 20mm. Once the upper screws are removed, you can take out the side clips and the two side screws.

Next, remove the wheel arch liner to access the internal screws that secure the headlight. After all screws are removed, disconnect the connector and extract the headlight.

The procedure is the same for the right front headlight.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Adjust the Headlights of the Alfa Romeo Giulietta?
How to Adjust the Headlights of the Alfa Romeo Giulietta?
Alfa Romeo Giulietta (2010-2020 / MK 1) To adjust the headlights of the Alfa Romeo Giulietta, insert the ignition key into the ignition switch to turn on the dashboard. Once the dashboard i…
How to Remove the Front Headlamps on the Alfa Romeo Giulietta
How to Remove the Front Headlamps on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, you will see how to remove the front headlamps on the Alfa Romeo Giulietta, following these simple steps. To remove the front…
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos