Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on a Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: License plate light

Video tutorial

Replacing the number plate light on an Alfa Romeo Giulietta follows a very simple and quick procedure that can be done independently, thanks to this brief tutorial. To perform the replacement, insert a very thin screwdriver into the small holes on the right and left of the bulb to press and push the light points outward.

Once extracted, disconnect the connector from each one and remove the bulb, insert the new one, and place the light back in. Turn on the ignition and lights to check that the replacement has been successful.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Light Bulb on an Alfa Romeo Giulietta
How to Replace the Number Plate Light Bulb on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) To replace the number plate light bulb on an Alfa Romeo Giulietta, you will need a flathead screwdriver. Insert a thin screwdriver into the side of t…
How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
How to Replace the Number Plate Lights on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This excellent video is brief but very informative, explaining with figures all the steps to replace the number plate lights on the Alfa Romeo Giulie…
Replacing the Number Plate Bulbs on the Alfa Romeo Giulietta
Replacing the Number Plate Bulbs on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video, we will see how to remove and replace the number plate bulbs on the Alfa Romeo Giulietta, as well as the Mito. First, obtain a very th…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos