Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Warning Light on the Aprilia Rx 50

Model: Aprilia Rx 50
Part: Warning light – error code

Video tutorial

In this new mini guide dedicated to your Aprilia Rx 50, discover how to reset the service light. First, locate the button on the right side of the dashboard and hold it down.

At the same time, turn on the ignition and release the button as soon as the display shows "Code". Now, use the same button to enter the code "211" and the reset of the light will start automatically. Finally, turn off the instrument panel.

If errors occur during the procedure, don't worry as you can repeat it without issues.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

Replacing the Gearbox Oil on the Aprilia Rx 50
Replacing the Gearbox Oil on the Aprilia Rx 50
Rx 50 In this video tutorial, you will learn how to replace the gearbox oil on the Aprilia Rx 50 2-stroke enduro bike by following these simple and quick s…
How to Replace the Clutch on an Aprilia RX 50
How to Replace the Clutch on an Aprilia RX 50
Rx 50 Today, we will see how to disassemble and replace the clutch plates on an Aprilia RX 50, following the instructions below. First, place your bike on …

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos