Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Audi A3

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Headlight bulb

Replacing one of the bulbs inside the front headlight of your Audi A3 is really very simple and it only takes a few seconds to complete the operation correctly. Let's find out what steps you need to follow. First of all, lift the front hood of the car and remove the protective cap located at the back of the headlight. At this point, unscrew the non-functioning bulb and replace it with a new one. Finally, all you have to do is reassemble the protective cap correctly and the procedure is successfully completed.

Posted on 1 September 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the front headlight bulb of the Audi A3.
Replacement of the front headlight bulb of the Audi A3.
Audi A3 (2003-2013 / 8P, MK 2) Today's guide will show us the procedure on how to dismantle and replace the headlight bulb of the Audi A3, following the instructions below. First, …
Replacement of the front headlight bulb of the Audi A3
Replacement of the front headlight bulb of the Audi A3
Audi A3 (2012-2019 / MK 3, 8V) Following these brief instructions, we will see how to disassemble and replace the low beam bulb of the front headlight of the Audi A3. First, open t…
Replacement of the front headlight bulb of the Audi A3
Replacement of the front headlight bulb of the Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Today we will discover the information that will allow us to disassemble and replace the headlight bulb of the Audi A3. In order to access the low be…

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos