Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part: Tire pressure warning light

The tire pressure warning light that appears on the instrument panel of the Audi Q3 will first of all require all tires to be brought to the recommended inflation pressure: this value is indicated on the sticker located on the driver's side door pillar. Once all tires have been inflated, it will be possible to access the menu on the central screen, moving with the buttons on the central panel: you will need to select the "Servicing & checks" option and then "Store tyre pressure". By confirming the message that will appear afterwards, the tire pressure warning light will disappear.

Posted on 6 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on an Audi Q3?
How to Reset the Tire Pressure Light on an Audi Q3?
Audi Q3 (2018-2025 / F3) To reset the tire pressure light on an Audi Q3, first inflate all tires to the recommended pressure: this value is found on the sticker located on th…
How do you reset the tire pressure warning light on the Audi Q3?
How do you reset the tire pressure warning light on the Audi Q3?
Audi Q3 (2018-2025 / F3) To make the tire pressure warning light on the Audi Q3 disappear completely, you will first need to inflate the tires until they are brought back to …
How do you reset the tire pressure warning light on the Audi Q3?
How do you reset the tire pressure warning light on the Audi Q3?
Audi Q3 (2011-2018 / 8U) You can completely turn off the tire pressure warning light that appears on the instrument panel of the Audi Q3 by first inflating all the tires to t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos