Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external handle of the Audi A1 door

Model: Audi A1 8X, MK 1 - Years 2010-2018
Part: Handle

The instructions in this guide will show us the procedure for disassembling and replacing the front door handle and its lock cylinder of the Audi A1. First, we open the front door of the car and start unscrewing the small screw we find on the side hole; then we remove the lock cylinder first and then detach the entire handle from the door, as shown in the video. At this point, we install the new opening handle, reinstalling the lock cylinder, applying the reverse procedure!

Posted on 15 September 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace Handle on Audi A1
How to Replace Handle on Audi A1
Audi A1 (2010-2018 / 8X, MK 1) How to remove the damaged handle? Let's see how to take off the external handle from inside the door. Remove the cover cap located on the side of the…
Removing the Door Panel on an Audi A1
Removing the Door Panel on an Audi A1
Audi A1 (2010-2018 / 8X, MK 1) How to remove the door panel on an Audi A1? Let's see how to take it off from the top of the front door. Remove the cover of the internal handle and …
Localization and fuse box diagram of the Audi A1.
Localization and fuse box diagram of the Audi A1.
Audi A1 (2010-2018 / 8X, MK 1) We see the location and diagram of the fuse boxes of the Audi A1 MK1; this model has fuses on the positive pole of the trunk battery; and fuses on th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos