Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Serpentine Belt on an Audi A4?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

To replace the serpentine belt on an Audi A4, lift the car with a jack or a lift to access the left side of the engine block. Here, at the lower area, you will find the serpentine belt that needs to be removed from its housing by loosening the center nut of the tensioner pulley.

Once the tension is reduced, you can slide the old belt out of its place and insert the new one. After installation, check that everything functions correctly.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Audi A4 (2007-2016 / B8) To replace the serpentine belt on an Audi A4, loosen the central nut on the tensioner pulley located at the front of the engine block. Once this pull…
Audi A4 (2000-2004 / B6) Today we will discover the instructions that will allow us to disassemble and replace the serpentine belt of the Audi A4 2.5 TDI, with a V6 engine. F…
Audi A4 (2007-2016 / B8) Today's main instructions will show us how to disassemble and replace the timing belt of the Audi A4 2.0 TDI. First, we open the hood of the car and …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos