Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuse Box of the 2012 Audi A6

Model: Audi A6 C7, MK 4 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuse box

See other generations:
Video tutorial

In this guide for your 2012 Audi A6, discover where the fuse box is located. All you need to do is open the driver's side door and remove the plastic cover at the end of the dashboard.

Once you do this, you will have free access to the fuses you were looking for, and you are done. To work on the fuses in case of electrical failures, you must first completely disconnect the car battery for safety reasons.

For more information on the fuse layout, you can refer to the vehicle's manual.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the 2020 Audi A6?
Where is the fuse box located in the 2020 Audi A6?
Audi A6 (2018-2026 / MK 5, C8) The 2020 Audi A6 has three fuse boxes inside. The first fuse box is located inside the cabin; specifically behind the left dashboard side panel. The …
Location of the Fuse Box in an Audi A6
Location of the Fuse Box in an Audi A6
Audi A6 (2004-2012 / C6, MK 3) In this tutorial, see the location of the fuse boxes in a third-generation Audi A6. The first fuse box is located at the far left of the dashboard, w…
Where is the fuse box located in the Audi A6?
Where is the fuse box located in the Audi A6?
Audi A6 (2018-2026 / MK 5, C8) The Audi A6 produced from 2018 to 2022 has two fuse boxes: one is located in the engine compartment near the battery, while the other fuse box is on …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos