Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Service warning light

When the service light comes on in a vehicle, it means that regular maintenance is necessary. After performing the necessary checks, it is possible to reset it. To reset the service light of the Audi A6 model C5, we must press the button on the dashboard while starting the vehicle. Keep the button pressed for a few seconds before releasing it to complete the reset of the light. If the reset does not occur, it may be necessary to go to a workshop for technical advice. The problem in these cases could be related to the sensors of the control unit.

Posted on 14 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Audi A6
How to reset the service light on the Audi A6
Audi A6 (1997-2004 / MK 2, C5) Today we will explain how to reset the service light of the Audi A6 in four steps. The reset of the light should be done only after performing mainte…
How to reset the service light on the 2004 Audi A6
How to reset the service light on the 2004 Audi A6
Audi A6 (2004-2012 / MK 3, C6) To reset the maintenance service light on a 2004 Audi A6 vehicle, we need to turn on the instrument panel and press the trip button a, located on the…
How to Reset the Oil Light on a 2019 Audi A6
How to Reset the Oil Light on a 2019 Audi A6
Audi A6 (2018-2026 / C8, MK 5) Today, reset the maintenance reminder or service light on a 2019 Audi A6 when the "oil change" message appears. To reset the service light, turn on t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos