Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the engine hood in the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Checks and maintenance

In this tutorial, we can see how to open the engine hood in the Audi A4, an extremely simple operation that is not different from the typical procedure of most vehicles. First, we unlock the locks by pressing the appropriate button on the remote control, then we open the driver's door, locate the lever located in the lower area of the passenger compartment and operate it. We then move in front of the vehicle, hold down the second lever and, at the same time, lift the hood. To close it, simply let it fall gently.

Posted on 28 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to open Audi A4 bonnet
How to open Audi A4 bonnet
Audi A4 (2004-2008 / B7) To open the bonnet of an Audi A4, open the driver's side door and locate it at the bottom left under the dashboard (next to the clutch pedal). Procee…
How to Open the Hood of an Audi A4
How to Open the Hood of an Audi A4
Audi A4 (2007-2016 / B8) Let's see how to open the hood of an Audi A4. Open the driver's door and pull the lever located at the bottom left of the dashboard, then lift the ho…
How to Open the Hood on an Audi A4
How to Open the Hood on an Audi A4
Audi A4 (2014-2024 / B9) In this video, see how to open the front hood on an Audi A4. Pull the lever located at the bottom left of the dashboard, then lift the hood slightly …

    Frequently Asked Questions

    • A4 2004-2008 - What causes the Audi A4 window regulator problem? Read answer
    • A4 2007-2016 - Where is the USB port of the Audi A4? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer
    • A4 2007-2016 - Where is the Audi A4 fuel pump relay located? Read answer

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos