Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Audi A3

Model: Audi A3 8Y, MK 4 - Years 2020-2026
Part: Service warning light

The service light reset, related to the car service on the latest generation Audi A3 vehicle, must be done using a scanner and OBD2 port. We then connect the scanner to the OBD2 port, which is located under the steering wheel. We turn on the instrument panel and select the options for resetting the service light using the scanner, waiting for the reset process to complete before disconnecting the port and restarting the instrument panel. Instructions on how to use the scanner for diagnostics and resetting the service light may vary depending on the type of computer purchased.

Posted on 30 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator light on the 2022 Audi A3
How to reset the service indicator light on the 2022 Audi A3
Audi A3 (2020-2026 / 8Y, MK 4) In the following article, we will see how to reset the maintenance service light of the 2022 Audi A3. To reset this light, first start the instrument…
How to reset the service indicator on an Audi A3
How to reset the service indicator on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The tutorial in question shows how to reset the service light of an Audi A3 car. Get into the vehicle, insert the key into the slot and turn it to th…
How to reset the "Service" indicator on an Audi A3?
How to reset the "Service" indicator on an Audi A3?
Audi A3 (2020-2026 / 8Y, MK 4) To reset the "Service" light on an Audi A3, turn on the instrument panel without starting the engine. Access the onboard computer through the central…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos