Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the clock of the Audi A4

Model: Audi A4 B5 - Years 1994-2000
Part: Clock

With the help of the following video tutorial, we will show you the steps to adjust the clock of the Audi A4 model B5. The first step is to turn on the ignition. The second step is to press the button located to the left of the display. By holding down the button, the clock menu will activate. The third step is to set the hour and minutes using the right and left buttons for confirmation. The fourth step is to turn off and on the ignition to complete the operation. These same steps can also be performed for Audi A4 B6 models.

Posted on 6 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Audi A4
How to adjust the time on the Audi A4
Audi A4 (2004-2008 / B7) Some vehicles have automatic time change, but vehicles produced from 2000 to 2010 do not have this feature, so it is necessary to adjust the clock ma…
How do you set the clock in a 2013 Audi A4?
How do you set the clock in a 2013 Audi A4?
Audi A4 (2007-2016 / B8) Don't worry, setting the clock in a 2013 Audi A4 is really simple. First of all, turn on the car, making sure that the MMI (Multimedia Interface) sys…
How to adjust the time in the Audi A4?
How to adjust the time in the Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial, we can see how to adjust the time in the Audi A4, an extremely simple and fast operation, to be carried out for example after disco…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos