Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the inner panel of the rear tailgate of the Audi A6?

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Door trim panel

In order to remove the inner panel of the rear tailgate of the Audi A6, you need to loosen the screws that secure the panel to its housing: these screws will be located at the bottom of the tailgate and at the top just below the rear window. Once the screws have been loosened, you can use a tool to pry off the tailgate lining in order to disconnect the underlying connectors; at this point, you can insert the new panel into place so that it can be properly secured with the screws.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Inner Panel of the Rear Hatch of the Audi A6?
How to Remove the Inner Panel of the Rear Hatch of the Audi A6?
Audi A6 (1997-2004 / MK 2, C5) To remove the inner panel of the rear hatch of the Audi A6, lift the hatch itself and loosen the two screws located at the base of the panel. Once th…
How to Remove the Trunk Panel of the Audi A6
How to Remove the Trunk Panel of the Audi A6
Audi A6 (1997-2004 / MK 2, C5) The illustrated instructions in this guide will show you how to disassemble and replace the rear trunk panel with the reflectors of the Audi A6. Firs…
How do you remove the rear headlight of the Audi A6?
How do you remove the rear headlight of the Audi A6?
Audi A6 (2011-2018 / C7, MK 4) In order to remove the rear light of the Audi A6, you need to open the rear hatch, so that you can access the panel located next to the corresponding…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos