Do it yourself
Frequently asked questions about cars and motorcycles

How to change the glow plugs on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Glow plugs

We can see in this video how to change the glow plugs on an Audi A3: we can find the kit of 4 glow plugs for example on E-bay with the code 265609544362 at the price of 115.00 euros, with free delivery. We will start by removing the connection plug, then unscrewing them and finally, using a magnet, we will extract them. The youtuber also equipped himself with a reamer that, coated with a suitable grease and inserted into the seat of the glow plugs, cleans the seat, before inserting the new glow plugs. Once this is done, we place the new glow plugs in their seat, after coating the thread with copper grease, and tighten them to 17 Nm. We put back the connection plug and the job is done.

Posted on 7 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) In this guide, you will see the instructions that will allow you to remove and replace the glow plugs of the engine on the Audi A3 2.0 TDI. First, op…
Audi A3 (2020-2026 / 8Y, MK 4) Learn how to replace the glow plugs on the Audi A3 engine. Open the bonnet, remove the cover from the centre of the engine, take off the oil cap, dis…
Audi A3 (2012-2019 / 8V, MK 3) Lift the bonnet and place the support rod. Remove the engine cover by hand. For a moment, unscrew the engine oil cap to remove the circular plastic u…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos