Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the glow plugs on the Audi A3 2.0 TDI

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Glow plugs

In this guide, you will see the instructions that will allow you to remove and replace the glow plugs of the engine on the Audi A3 2.0 TDI. First, open the vehicle's bonnet and start by removing the upper plastic engine cover; then disconnect the electrical connector of the glow plug, undoing it with a socket spanner to remove it, as shown in the video. At this point, install the new original glow plug, replacing the other glow plugs if necessary, following the video tutorial to the end!

Posted on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) We can see in this video how to change the glow plugs on an Audi A3: we can find the kit of 4 glow plugs for example on E-bay with the code 265609544…
Audi A3 (2020-2026 / 8Y, MK 4) Learn how to replace the glow plugs on the Audi A3 engine. Open the bonnet, remove the cover from the centre of the engine, take off the oil cap, dis…
Audi A3 (2003-2013 / MK 2, 8P) Today we will see the main steps useful for disassembling and replacing the turbocharger of the Audi A3 2.0 TDI. First, lift the vehicle and start di…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos