Do it yourself
Frequently asked questions about cars and motorcycles

How do you program the key of the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Key

In order to program the key of the Audi A3, you need to insert the key you want to program into the corresponding ignition lock: once the key has been inserted, you need to connect a diagnostic tool to the vehicle's OBD port. This port is located on the dashboard just below the steering column: once connected, you can follow the instructions in the tutorial to complete the programming. After the operation is completed, you can disconnect the scanner and verify that the key works.

Posted on 17 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) To ensure that the key of the Audi A3 is programmed correctly, you will need to insert the blank key into the corresponding slot and turn it to posit…
Audi A3 (2012-2019 / 8V, MK 3) In order to program the new key for the Audi A3, you will need to insert it into the corresponding ignition block: once the dashboard is turned on, i…
Audi A3 (1996-2003 / MK 1, 8L) In this tutorial, we will see how to programme a remote control in the Audi A3, a very simple and quick operation to perform, for example, after repl…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos