Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the key of the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Key

In order to program the new key for the Audi A3, you will need to insert it into the corresponding ignition block: once the dashboard is turned on, it will be possible to connect a diagnostic tool to the vehicle's OBD port. The port will be located under the steering column, and after the connection, you will need to select the model of the car and the corresponding version: then you can follow the instructions to connect the new key to the car's ECU. Finally, you can disconnect the scanner to verify that everything works.

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the Audi A3?
How do you program the key of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In order to program the key of the Audi A3, you need to insert the key you want to program into the corresponding ignition lock: once the key has bee…
How do you program the key of the Audi A3?
How do you program the key of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To ensure that the key of the Audi A3 is programmed correctly, you will need to insert the blank key into the corresponding slot and turn it to posit…
How do you program the key of the Audi A3?
How do you program the key of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) The new key that is intended to be programmed for the Audi A3 must first be inserted into the corresponding ignition block: once the dashboard has be…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos