Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights on the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Tail light

In this tutorial we can see how to disassemble the rear lights on the Audi A4, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then open the trunk door and release the panel located right on the back of the headlight in question. Next, unscrew the plastic fixing nut indicated, grab the headlight and separate it from the body by pulling it towards you. At this point, we can disconnect the power connector, replace the faulty element and follow the reverse procedure.

Posted on 18 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of the Audi A4 B6
How to Remove the Rear Headlight of the Audi A4 B6
Audi A4 (2000-2004 / B6) In this guide, discover how to properly remove the rear headlight of your Audi A4 B6. First, turn off the car and park it on a flat surface to perfor…
How to disassemble the rear lights in the Audi A4?
How to disassemble the rear lights in the Audi A4?
Audi A4 (2004-2008 / B7) In this tutorial, we can see how to replace the rear lights on the Audi A4, an extremely simple and quick operation. First of all, make sure that the…
How to Remove the Tail Lights on an Audi A4?
How to Remove the Tail Lights on an Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial, you will see how to remove the tail lights on an Audi A4, a very simple and quick operation. First, ensure the key is not in the ig…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos