Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service warning light on an Audi A4

Model: Audi A4 B6 - Years 2000-2004
Part: Service warning light

How to reset the service warning light on an Audi A4. Very simple operation, we enter the car body, turn on the instrument panel and check the light on, press the fixed button located near the car speedometer, scroll the menu with the buttons on the sides of the steering wheel, until you find the reset message to do. We select the desired maintenance and confirm with the key. Turn off the instrument panel once the service has been reset and turn it on again to check the reset. Always remember to make changes to the car service with the vehicle stopped and turned off.

Posted on 2 June 2019 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Audi A4
How to reset the service light on the Audi A4
Audi A4 (2014-2024 / B9) The steps to reset the service light on the Audi A4 are simple and quick to perform independently. To reset it, we must keep the instrument panel off…
How to reset the "Service" indicator on an Audi A4?
How to reset the "Service" indicator on an Audi A4?
Audi A4 (2004-2008 / B7) Good morning, today we will focus on the important procedure of resetting the "Service" light on our Audi A4. Before proceeding, make sure you have p…
Resetting the service light of the Audi A4.
Resetting the service light of the Audi A4.
Audi A4 (2014-2024 / B9) Today we will discover how to reset the service light for the regular maintenance of the engine oil change in the Audi A4. First, we get into the car…

Other guides you may be interested in

How to Change the Diesel Filter on a Renault Captur 1.5 dCi

The diesel filter on the Renault Captur is always of the immersion type, but instead of being located at the top of the engine bay, it is positioned lower, inside the front right wheel arch (passenger side), practically under the headlamp. To replace it, it is advisable to lift the vehicle, remove the front right wheel and the corresponding inner lining to access the filter location. Unscrew the fastening nuts of the support clamp to extract it from its housing and disconnect the connector and pipes. At this point, unscrew the fixing screws of the cap, remove the old filter and insert the new one, also replacing the O-ring seals, and then reverse the steps for installation. Before starting the engine, turn the ignition on and off several times to allow the filter to fill.

Watch the video!


by ScegliAuto

More videos